Absolutely not. Although there will be some misting on the underside of the Showerdome® shower top (as there will be on the glass wall) there will never be enough to create droplets that could wet your hair.
Simple – there isn’t any! Shower steam (or more accurately – ‘moisture laden air’) is only created when the cold air in your bathroom, meets the warm moist air that your shower creates. It is ONLY when these 2 air masses mix, that steam is created.
When you fit a Showerdome® shower top, you are putting a barrier between these 2 components, and therefore NO shower steam is created.
A Showerdome® shower top is a one off expense, with no moving parts to ever replace, and requires no electricity to run.
As you don’t have cold air from your bathroom cascading over the sides of your shower – the majority of Showerdome® shower top users report that their shower is warm and cosy, and they are therefore able to reduce the water temperature at the tap.
As well at this, your bathroom maintenance costs will be significantly reduced, as paint & fixtures damage from moisture is not an issue.
In order to provide accurate measurements – follow these easy steps:-
• Stand INSIDE the shower cubicle
• Place your tape measure in the middle back corner (where the 2 walls meet)
• Measure from the corner to the inside of the framework on each side
• Ensure you advise the shower shape (square, triangle, curved)
Most importantly, read the detailed instruction booklet provided. Double check your measurements before attempting to cut the acrylic.
If the temperature is below 10 degrees Celsius, we suggest you attempt to warm the Showerdome® shower top either by standing it in the warmest room in the house, or next to an oil filled heater for some time prior to cutting.
Once ready to cut, you must ensure that what you are cutting to waste is fully supported while making the cut. If you allow the acrylic you are cutting away to hang down, it will cause feather cracks on the actual dome.
Apart from gathering dust on the top, it is unlikely that your Showerdome® shower top will need much cleaning. You can use a long reach feather duster to flick any dust off.
We recommend using a microfiber cloth with a standard glass cleaner if you feel the Showerdome® shower top needs a more thorough clean. Many of them have anti-static properties (like Pledge), which assist with repelling the dust from settling on the top.
Do NOT use strong cleaners, scrubbing devices or abrasives of any nature.